StainBlocker for Grout - TILELab Tile Care Products
StainBlocker for Grout - TILELab Tile Care Products

StainBlocker for Grout

Regular price $24.95

What's it for

StainBlocker for Grout is a sealing and performance-enhancing additive to be used when mixing grout and water. Unlike traditional sealers, which are applied to grout after it has dried for 2-3 days, StainBlocker for Grout is added directly to the grout mix during installation, to immediately repel dirt and make cleanup easier after the grout is dry. StainBlocker for Grout will not affect grout colour.

Key Features

  • Protects grout from staining
  • Use with water when mixing grout
  • Makes grout stronger

Uses

  • Use as a grout additive with any cement-based grout
  • Easy to use – just add when mixing grout and water
  • GROUT TYPES: Use with all cement-based grouts
  • Can use with both sanded and non-sanded grouts

Benefits of Product in the Installation

  • Seals and enhances the performance of the grout
  • Added directly to the grout mix during installation
  • Immediately repels dirt and makes clean-up easier after the grout is dry
  • Will not affect grout color

Limitations to the Product

Should only be used as a grout additive and not an independent sealer. Only to be used with cement based grouts Not for use with an epoxy or other grout systems

Technical Data

TECHNICAL DATA SHEET

SAFETY DATA SHEET

Obtain the applicable LIMITED PRODUCT WARRANTY at www.custombuildingproducts.com/product-warranty or send a written request to Custom Building Products, Inc., Five Concourse Parkway, Atlanta, GA 30328, USA. Manufactured under the authority of Custom Building Products, Inc. © 2017 Quikrete International, Inc.

Mixing Procedures

946 ml Mixing Instructions:

FOR USE WITH 11.34 KG SANDED GROUT. This additive replaces 946 ml of the water needed for your Grout. FOR USE WITH 4.5 kg NON­SANDED GROUT. This additive replaces 354 ml of the water needed for your Grout. Do not use the full amount of water listed on bag.

354 ml Mixing Instructions:

FOR USE WITH 3.17 KG & 4.5 KG  SANDED AND NON-SANDED GROUT. This additive replaces a portion of the water needed to mix your Grout. DO NOT use the full amount of water listed on grout package. Mix StainBlocker for Grout with water according to the table below: * Up to 59 ml of additional water may be added to reach desired consistency ** Up to 118 ml of additional water may be added to reach desired consistency

Testimonials

Easy - Add when water is required, just substitute like amount of stain blocker. Product did not change the color of the sanded grout.

Jimmy C

This product strengthens the grout joint and the tighter seal blocks stains. Combine it with a sealer when the grout is dry and you double protection. If you don't use a product like this the grout is much more likely to crack which will allow moisture to enter the grout degrading it even further.

Gareth